- Photron fastcam software how to#
- Photron fastcam software manual#
- Photron fastcam software software#
- Photron fastcam software download#
Please wait while all data is transferred from the camera. Progress is shown in the transfer window.
Photron fastcam software download#
Download time depends on the recording time (Pre and Post time), resolution and frame rate and can take a lot of time. Downloading starts when Dewesoft recording stops. Just follow the instructions (Close camera lens and then press OK) and the sensor will get calibrated.įrames data is recorded into camera memory. You can do that by selecting Calibrate camera sensor from Custom setup and press the Set button. If you do not have these files or factory calibration data is not satisfying or from any other reason the picture is grainy and/or contains fixed shading pattern, you have to calibrate the sensor to get a better picture. Files are optimized for 1000fps frame rate and the picture will not be optimal when other frame rates are selected. If you copy these files to Dewesoft Addons folder they will be used automatically. Here is an example how the calibration files are named (e.g. Camera sensor calibrationĮach camera comes with two sensor calibration files. The maximum time of recording depends on Resolution, Frame rate and camera memory. Pre and Post time are parameters for setting time of recording before the trigger and after the trigger.
Photron fastcam software manual#
Refer to Photron hardware manual for further information on camera out signals. The trigger signal is usually just 2-3us 5V pulse, so counter or high enough sample rate must be used to catch it.
If Dewesoft trigger is used then camera trigger out signal can be used for synchronization. If the camera is triggered with an external trigger then the same signal can be used for synchronization. Synchronization channel and trigger level parameters take care of camera synchronization with analog data. The camera settings are applied to the camera as soon as something is changed, so the preview is always up to date with current settings.
Photron fastcam software software#
PFV software can be used to change other parameters not supported by Dewesoft (if the parameter is not supported in Dewesoft, Dewesoft will leave it as it was). For example, at resolution 1024*1024 1000fps is the fastest sample rate, but at resolution 256*256, sample rates to 10000fps are possible. The options are depending on the camera model and one from another. You can also calibrate the camera sensor here. Here you can set Resolution, Frame rate, Shutter speed and Sensor gain (if the camera supports hardware sensor gain) parameters. You can also find Basic settings group where you can adjust camera name and Preview group where you can see preview used for picture setup. There are two important groups of settings in Camera setup -> Camera settings and Trigger setup. There is no need that all cameras have the same frame rate. You can set the frame rate for every single camera in camera setup. If any camera does not support the selected frame rate, the closest one will be used.
Photron fastcam software how to#
Refer to Photron Manual for information on how to connect and apply external triggers.įrame rate selected here will be applied to all cameras.
The first one is for Store options settings and the second one is for Frame rate settings. In the high-speed camera options section, there are two combo boxes.
0 kommentar(er)
